Untitled Document
 
             
Untitled Document
Untitled Document
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Products & Solution > ATCA Products > Blade > SF Blade  
NS Blade SF Blade CP Blade Storage Blade
Switch Fabric Blade
Total
Ports
ATCA
Chassis
Base Interface
(PICMG3.0)
Fabric Interface
(PIGMG3.1)
SF4810
48 GbE
Up to 16 slot
24-port
- 14 Node / 1 ISL / 2 CMM
- Up to 1 Front(orCMM) Uplink
- Up to 7 Rear Uplink(RTM)
24-port
- Up to 1 Front Uplink
- Up to 8 Rear Uplink(RTM)
- 1 4Gb FC Uplink
SF1600
16 GbE
Up to 14 slot
17-port
- 12 Node / 1 ISL / 1 CMM
- 3 Front Egress
Do not supported
SF4820
48 GbE
Up to 16 slot
24-port
- 14 Node / 1 ISL / 1 CMM
- Up to 12 Front Egress
- Up to 6 Front Egress
24-port
- 12 or 14 option.1
- 8 or 12 option.2
SF7200
72 GbE
Up to 16 slot
24-port
- 14 Node / 1 ISL / 2 CMM
- 4 Front Egress
- 3 Rear Egress
48-port
- 6 Option 3(4Gb/s)
- 8 Option 2(2Gb/s)
- 1 10GigE ISL
- 4 Front Egress
- 4 Rear Egress



SF4810 AdvancedTCA Switch Fabric Blade

개 요 24 Port Gigabit Ethernet Base Fabric L2/L3 Switch
24 Port Gigabit Ethernet Expansion Fabric L2/L3 Switch
Fully Managed Solution with SNMP, CLI, Web Interface, and Telnet/SSH
Wire Speed Non-blocking Performance on All 3 Switches
High Availability Through Redundant Hub and Shelf Manager Support
 
특징

장점
Fabric
Ethernet
Features
AdvancedTCA PICMG 3.0/3.1 Option 1 Hub Board
3 Switches on One Board
Fully Managed Solution with SNMP, CLI, Web Interface, and Telnet/SSH
24 Port Gigabit Ethernet Base Fabric L2/L3 Switch
24 Port Gigabit Ethernet Expansion L2/L3 Switch
Supports up to the full 16 slot Shelf
High Availability Through Redundant Hub Board Support
Dual Redundant Shelf Management Controller Support (Cross Connect)
8 GbE Base Fabric, 9 GbE Expansion Fabric, and 1 4Gb FC Uplink Port
Full Support for AdvancedTCA IPMI with Redundant Buses


SF1600 AdvancedTCA Switch Fabric Blade

개 요 Intel IXE5416 GigE Switch Fabric provides a single-chip, non blocking fabric capable of switching up to 24 million packets per second
10/100/1000 Mbps Ethernet for up to 12 payload slots, 3 egress ports, and a dedicated link to the redundant fabric slot
High Performance onboard Motorola MPC8255 PowerPC Processor provides 380 MIPS for Layer 4-7 packet classificatio
High Performance onboard Motorola MPC8255 PowerPC Processor provides 380 MIPS for Layer 4-7 packet classification
AdvancedTCA™ HotSwap compliance ensures that Field Replaceable Units may be swapped out with a minimum Mean Time to Repair
Full support for the IPMI specification ensures compatibility with all PICMG 3.0 compliant chassis management modules
 
특징

장점
Dynamic & Static Layer 2 switching
Dynamic & Static Layer 3 routing
Layer 4 - 7 packet classification
Linux 2.4.2 Kernel optimized for PowerPC
Enhanced Protocol Stack
FTP, TFTP, Telnet
DHCP Server/Client/Relay
Network File Server / Web Server
Network Address Translation
802.1Q VLAN with GARP, GMRP, GVRP
802.1D Spanning Tree with 802.1w
Virtual Router Redundancy Protocol
Rapid Spanning Tree Algorithm
IGMP Snooping, IGMPv1, IGMPv2, DVMRP
IEEE802.1p Traffic Class/Priority Queues
Differentiated Services for QOS
SNMPv1, SNMPv2 SNMPv3
MIB-II (RFC1213) (RFC2013)
VLAN Extension MIB (RFC2674)
802.1D Spanning Tree MIB
RMON and RMONv2 MIB
Commercial Open Policy Service


SF4820 AdvancedTCA Switch Fabric Blade

개 요 ATCA hub subsystem with a total of 48 Gigabit Ethernet ports in both non-redundant and dual-star architectures
Re-configuration options allow both 14 and 16 slot ATCA chassis to be supported
Payload boards requiring PICMG 3.0 Base Interface or boards requiring PICMG 3.1 Option 1 or Option 2 Fabric Interface or any combination may be used
SF4820 supports 12 or 14 payload slots via the 10/100/1000BaseT base interface
SF4820 implements 24 ports for the PICMG 3.1 fabric. To accommodate different applications, the ZX7000 has three configuration options to allocate these ports for different purposes
SF4820 may be upgraded to other forms of PICMG 3.1 or other ATCA data-plane standards such as PICMG 3.4
 
특징

장점
48-port GigE Non-Blocking Switch Fabric
Two PMC/PTMC, Option 5 GigE sites (2.0Gb/s)
Optional RTM
OpenArchitect 3 w/ Linux Kernel
Wire-speed L2/L3 Switching
Wire-speed L2 - L7 Packet Classification
IEEE 802.1Q 4096 VLANs
Linux shell management
HTTP Browser-based management
SSH Secure Shell
IEEE 802.1p Class-of-Service
DHCP Server/Client/Relay
Network Time Protocol (NTP)
VRRP
Link Aggregation
Link Aggregation Control Protocol
Port Mirroring
Load Balancing
COPS, DiffServ
OSPF v1, v2, RIP v1, v2, BGP/EGP
STP, RSTP, MSTP
GMRP,GVRP


SF7200 AdvancedTCA Switch Fabric Blade

개 요 Multiple 10Gigabit Ethernet Ingress/Egress
Full Seperation between ATCA Base and Data
PICMG 3.1 Option 1, 2, and 3 support
IPv6 Switching
High Availability Through Redundant Hub and Shelf Manager Support
 
특징

장점
24-port 3.0 Base
- 14 Base payload
- 1 Base ISL
- 2 ShMC
- 4 Front Egress
- 3 Rear Egress
48-port 3.1 Fabric
- 6 Option 3 (4.0Gb/s)
- 8 Option 2 (2.0Gb/s)
- 1 10GigE ISL
- 4 Front Panel Egress
- 4 Rear Panel Egress
Up to 3 10GigE Egress
Full Base and Fabric Separation
Open Architect 3 w/ Linux Kernel
Wire-speed L2/L3 Switching
Wire-speed L2 - L7 Packet Classification
IPv4 and IPv6 Supported

Untitled Document